![]() |
Careers Contact Us |
AMBULANCE & MEDICAL | PSYCHOLOGY LINE |
![]() |
Patient Monitors | Defibrillators | Transport Ventilators | Suctions | Ambulance | Muscle Stimulators | Motion Analysis | Metabolic Measurement | Height & Weight |
Home Page >> Medical Equipment >> Transport Ventilators
Transport Ventilators
|
Electronic pulmonary ventilator Spencer 190 is a pulmonary ventilator of the latest generation, with a one stroke cycle, limited to pressure and controlled by a powerful micro-processor.
It guarantees flowing pressure, respiratory frequency and constant fraction of inspired oxygen, independent from the insufflation pressure. There are three modes of ventilation: controlled, assisted and assisted/controlled (ABS). The respiratory act is completely monitored. When ABS is inserted the form of the luminous wave allows easy synchronisation of the instrument with the patient.
The safety of the patient is guaranteed by monitoring systems and alarms of the airway pressure, power pressure and apnea. The compact structure, limited weight, simplicity of regulation and control of the parameters, the incorporated visual and acoustic security devices allow safe use even by untrained lay people.
The control instruments are designed in such a way as to allow clear and immediate reading. The indications have been reduced to the essentials and the commands are logically positioned.
Complete with : - PVC patient circuit tube - Spencer Mask size 4 - non-rebreathing valve - The Kompak and Porta Vent version are available. - Dimensions: 330 x 175 x h180 mm - Weight: 4,8 kg
Technical characteristics Drive: microprocessor Ventilation mode: controlled – assisted - assisted/controlled (ABS) Frequency: from 5 to 40 BpM Capacity: from 2 to 20 L/min I/E connection: 1/2 Sensitivity trigger: from 0 to -20 cm H2O Oxygen concentration: from 60 to 100% Security valve: from 15 to 70 cm H2O Electronic security overpressure: adults: 55 mbar - children: 25 mbar Medical gas power: 3,5 kg/cm ± 0,5 Battery duration: around 3 hours Patient circuit: corrugated tube Non-breathing valve: autoclavable Alarms: maximum pressure, minimum pressure, apnea, battery, medical gas Luminous indications: spontaneous inhalation and ventilation mode Reset alarms: 30 sec LED test Digital keys Vacuum manometer: from -20 to +70 cm H2O External power: 12 Vdc Internal power: 12 Vdc Structure: varnished aluminum with epoxy powder Panel: permanent polycarbonate |
![]() ![]() |
Electronic pulmonary ventilator
An exclusive system allows a stabile mix of oxygen with air, despite the ventilation/minute, the frequency and the insufflations pressure The compact structure, lightness, alarms, the simplicity of regulation allow secure use even by lay people.
The non-rebreathing valve is supplied with a special pressure limiting device that can be used for adults or children. Thousands of ventilators used all over the world make a trustworthy point of reference in the mechanical ventilation scenario.
The control instruments are designed in such a way as to allow clear and immediate reading. The indications have been reduced to the essentials and the commands are positioned logically to be just it the night place.
Complete with: • PVC patient circuit tube • Spencer Mask size 4 • non-rebreathing valve The Kompak and Porta Vent version are available. Dimensions: 295 x 160 x h155 mm Weight: 3 kg
Technical characteristics: Drive: microprocessor Ventilation mode: controlled Frequency: from 5 to 35 BpM Weight capacity: from 2 to 20 L/min I/E connection: 1/2 Oxygen concentration: from 60 to 100% Security valve: from 15 to 70 cm H2O Medical gas power supply: 3,5 kg/cm ± 0,5 Battery duration: around 4 hours Patient circuit: corrugated tube Non-breathing valve: autoclavable Medical gas alarm: sounding Battery alarm: visual/sounding Vacuum manometer: from -20 to +70 cm H2O External power: 12 VDC Internal power: 12 VDC Structure: varnished aluminum with epoxy powder Panel: permanent polycarbonate |
![]() |
V-PORT
PORTABLE VENTILATOR
PORTABLE VENTILATOR
Description:
V-PORT is used for first-aid, ambulance, emergency situation and
Patients, transport in hospital. It can be used for child and adult
patients.
Features:
Multiple functions, compact design, easy to take, design for transport
and fir-staid.
The main parts adopt good-quality components, accurate and reliable.
LCD screen, simple and intuitive operation.
3 kinds of power sources can be chosen: AC, DC and internal battery.
Configuration: Ventilator, pressure-Reducing valve, high- pressure oxygen tube, lung simulator, Breathing circuit, Mask, head band, power adapter, carrying bag, 2L aluminum alloy oxygen cylinder, oxygen bridge |